Device Information - Dimplex SI 75ZSR Installation And Operating Instructions Manual

Brine-to-water heat pump for indoor installation
Table of Contents

Advertisement

12

12 Device Information

Device information for brine-to-water heat pumps (heating only)
1
Type and order code
2
Design
2.1
Model
2.2
Degree of protection according to EN 60 529
2.3
Installation location
3
Performance data
3.1
Operating temperature limits:
Heating water flow
Cooling, flow
Brine (heat source, heating)
Brine (heat sink, cooling)
Antifreeze
Minimum brine concentration (-13 °C freezing temperature)
3.2
Temperature spread of heating water (flow/return flow) at B0 / W35K
3.3
Heat output / COP
3.4
Cooling capacity / COP
3.5
Sound power level
3.6
Sound pressure level at a distance of 1 m
3.7
Heating water flow with an internal pressure differential of m³/h / Pa
3.8
Brine throughput with an internal pressure differential
3.9
Refrigerant; total filling weight
4
Dimensions, connections and weight
4.1
Device dimensions without connections
4.2
Device connections to heating system
4.3
Device connections to heat source
4.4
Weight of the transportable unit(s) incl. packing
5
Electrical Connection
5.1
Nominal voltage; fuse protection
5.2
Nominal power consumption
5.3
Starting current with soft starter
Nominal current B0 W35 / cos ϕ
5.4
6
Complies with the European safety regulations
7
Additional model features
7.1
Water in device protected against freezing
7.2
Performance levels
7.3
Controller internal/external
1. This data indicates the size and capacity of the system. For an analysis of the economic and energy efficiency of the system, both the bivalence point and the regulation should
also be taken into consideration. The specified values, e.g. B10 / W55, have the following meaning: Heat source temperature 10 °C and heating water flow temperature 55 °C.
2. Operation with 2 compressors
3. Operation with 1 compressor
4. Note that additional space is required for pipe connections, operation and maintenance.
5. See CE declaration of conformity
6. The heat circulating pump and the heat pump controller must always be ready for operation.
E-8
°C
°C
°C
°C
1
at B-5 / W55
kW / ---
kW / ---
1
at B0 / W50
kW / ---
kW / ---
1
at B0 / W35
kW / ---
kW / ---
at B20 / W8
kW / ---
kW / ---
at B20 / W18
kW / ---
kW / ---
at B10 / W8
kW / ---
kW / ---
at B10 / W18
kW / ---
kW / ---
dB(A)
db(A)
type / kg
4
H x W x L mm
Inch
Inch
kg
V / A
1
B0 W35
kW
A
2
A / ---
6
SI 75ZSR
Reversible
Up to 55
+7 to +20
-5 to +25
+5 to +30
Monoethylene glycol
2
54.9 / 2.0
3
27.3 / 2.1
2
62.3 / 2.5
3
31.3 / 2.5
2
65.3 / 3.5
3
35.1 / 3.8
2
82.1 / 5.0
3
44.9 / 6.4
2
100.0 / 5.6
3
55.0 / 7.4
2
86.6 / 6.1
3
47.4 / 7.7
2
98.2 / 6.3
3
53.2 / 8.2
11.5 / 7300
20.5 / 17800
R404A / 16.1
1890 × 1350 × 750
G 2" internal/external
G 2 1/2" internal/external
400 / 63
34.03 / 0.8
IP 21
Indoors
25%
5
69
54
607
18.86
105
5
Yes
2
Internal

Advertisement

Table of Contents
loading

Table of Contents

Save PDF