Maintenance - Field Controls 46520200 Manual

MAINTENANCE

WARNING: Disconnect power to
the transformer before commencing
inspection and cleaning.
NOTE: Wear disposable, non-
absorbent protective gloves prior to
inspection procedure in case of
accidental breakage of glass.
1. We recommend
cleaning the lamp at least every 6
months. Frequency depends upon the
environment. Such as: the type of air
filter, duration of use and replacement
cycle.
2. To maintain maximum output intensity,
replace the UV-Aire lamp annually. The
lamp should operate continuously for
maximum lamp
effectiveness.
WARNING: Never expose eyes or skin to UVC light from any source. Looking directly at the UVC light may cause permanent
eye damage or blindness. Never operate the
glass portion of the lamp with your hands.
inspecting and
life and light
UV-Aire
Air Purifying System out of the plenum. Avoid touching the
Page 5
Diagram A
Diagram B