Installation - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Hardware Installation Manual

Managed Stackable Layer 3 Switches GSM7328S v2 and GSM7352S v2 Hardware Installation

Installation

Install the equipment in the sequence presented in this chapter, as shown below:
1. Select a Location.
See "Select a Location" on page
2. Install the Switch.
See "Install the Switch" on page
3. Check the installation.
See "Check the Installation" on page 3-6
4. Apply power and check the LEDs.
See "Connect to Power and Check the LEDs" on page
Hardware Installation
3-4.
3-5.
v1.0, July 2009
3-6.
3-3