Table of Contents
Advertisement
Macintosh OS 8.6 or
1. Do not plug the USB Digital Video Camera to the USB
port before setup is completed and instructed to do so.
2. Insert the MAC Driver CD-ROM that came with the
USB Digital Video Camera into the appropriate drive.
3. Once initiated double click on the "USB Camera
installer" icon to start the installation of the driver.
4. A prompt will appear featuring the creator of the
installer by Aladdin System. Click on the Continue icon
to proceed further.
5. After installation, a prompt will appear with the
following message: "Installation was successful.
Choose Quit if you are finished or Continue to perform
further installations". Click on the Quit icon and you
are finished installing the USB Digital Video Camera.
6.
When the driver installation is completed you can plug
in the USB Digital Video Camera into the USB port on
your PC.
Once the driver installation is completed and the USB
7.
Digital Video Camera is plugged into the USB port you
can initiate the Digital Video Camera to start capture
images through the video application programs.
15
Above Installation
6
Advertisement
Table of Contents
