Connecting The Ethernet Cable; Connecting The Power; Shutting Down The Sharecenter Pro Dns-1550-04 - D-Link ShareCenter Pro DNS-1550-04 User Manual

2.3 Connecting the Ethernet cable

To connect the ShareCenter
1. Attach one end of the network cable to the RJ45 network
connection. See Figure 2.
2. Attach the other end of the network cable to your Ethernet hub or
switch.

2.4 Connecting the Power

To power the ShareCenter
1. Attach the two power cords to the dual power supplies of the
ShareCenter
ends into the power source. See Figure 2.
2. On the front of the ShareCenter
power button. See Figure 1. It takes about a minute to boot the
ShareCenter
․
․

2.5 Shutting Down the ShareCenter Pro DNS-1550-04

To shut down the ShareCenter
power button until the power LED indicator turns red. See Figures 3 and
4.
®
®
Pro DNS-1550-04 enclosure and plug the other
®
Pro DNS-1550-04. When fully booted:
The System Status LED turns blue. See Figure 1.
The buzzer beeps one time.
®
Pro DNS-1550-04 to your network:
Pro DNS-1550-04:
®
Pro DNS-1550-04, press the
®
Pro DNS-1550-04, press and hold the
13