−
−
−
−
−
−
3. Click the Save button.
• Buzzer
−
Click the Sound button to unmute the buzzer; or click the
Mute button to mute the buzzer.
−
Click the Settings button to enable or disable the buzzer.
To enable the buzzer for the system, select the Enable
Buzzer option and click the Save button. To mute the buzzer
for all events, you must clear the Enable Buzzer option.
• LED. Move your mouse over the LED and click the Settings button,
which allows you to set the LED by selecting:
−
Always ON
−
Always OFF
−
Daily
• Fan. Move your mouse over the Fan and click the Settings button,
which allows you to set the LED by selecting:
capacity to the nearest 1,000,000,000 byte
boundary.
10GB Truncate – Reduces the useful capacity to
the nearest 10,000,000,000 byte boundary.
Group Rounding – Uses an algorithm to
determine how much to truncate. Results in the
maximum amount of usable drive capacity.
Table Rounding – Applies a predefined table to
determine how much to truncate.
Write Back Cache Flush Interval – Enter a value into
the field, 1 to 12 seconds
Phydrv Driver Temperature Threshold
Enclosure Polling Interval
Adaptive Writeback Cache:
UPS power good: write back
UPS power fail: write through
No UPS: write through
Host Cache Flushing
Forced Read Ahead (cache) – Check the box to
enable or uncheck to disable
29