To set up Access Protection:
1.
Click AdminTool tab > Network Security.
2.
Click the Access Protection button and complete the required settings.
−
Enable Services – Check to enable the function.
−
Block Policy
−
Protocol
3.
When done, click the Save button.
To set up SSL Certificate:
1.
Click AdminTool tab > Network Security.
2.
Click the SSL Certificate button and complete the required settings.
−
Specific SSL Certificate – Check to enable the function.
−
Certificate (X.509 format)
−
Private Key (X.509 format)
3.
When done, click the Save button.
69