Administrator Settings - D-Link DIR-827 User Manual

Section 3 - Configuration
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are two accounts that
can access the management interface through the web browser. The accounts are admin and user. Admin has read/write access while user has
read-only access. User can only view the settings but cannot make any changes. Only the admin account has the ability to change both admin and
user account passwords.
Admin Password: Enter a new password for the Administrator Login Name. The
administrator can make changes to the settings.
User Password: Enter the new password for the User login. If you login as the
User, you cannot change the settings (you can only view them).
Enter a name for the DIR-827 router.
Gateway Name:
Enter a name for the router.
Enable Graphical Enables a challenge-response test to require users to type
Authentication:
letters or numbers from a distorted image displayed on the
screen to prevent online hackers and unauthorized users from
gaining access to your router's network settings.
Enable HTTPS Check to enable HTTPS to connect to the router securely.
Server:
Enable Remote Remote management allows the DIR-827 to be configured
Management:
from the Internet by a web browser. A username and password
is still required to access the Web-Management interface.
In general, only a member of your network can browse the
built-in web pages to perform Administrator tasks. This feature
enables you to perform Administrator tasks from the remote
(Internet) host. The port number used to access the DIR-827.
Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP
address of the DIR-827 and 8080 is the port used for the Web
Management interface.
Remote Admin If you have enabled HTTPS.Server and checked Use.HTTPS,
Inbound Filter: you must enter https:// as part of the URL to access the router
remotely.
Details: This section will list any rules that are created. You may click the
Edit icon to change the settings or enable/disable the rule, or
click the Delete icon to remove the rule.
D-Link DIR-827 User Manual

Administrator Settings

76