Section 3 - Configuration
On this page the user can configure the IPv6 firewall settings. The firewall settings section is an advance feature that is used to allow or deny
traffic from passing through the device. It works in the same way as IP Filters with additional settings. You can create more detailed rules for the
device.
Name: Enter a custom firewall rule name here.
This name is used for identification.
Source.
Select the appropriate source interface
Interface:
used here.
Destination.
Select the appropriate destination inter-
Interface:
face used here.
Schedule: Select a time schedule that will be applied
to this rules here.
IP.Address.
Enter the IPv6 address range used here.
Range:
Protocol: Select the protocol used for this rule here.
Options to choose from are ALL, TCP, UDP,
and ICMP.
Port.Range: Enter the port range used for this rule
here.
D-Link DIR-827 User Manual
IPv6 Firewall
74