Inbound Filters - D-Link DIR-827 User Manual

Section 3 - Configuration
The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can configure inbound
data filtering rules that control data based on an IP address range. Inbound Filters can be used with Virtual Server, Port Forwarding, or Remote
Administration features.
Name:
Enter a name for the inbound filter rule.
Action:
Select Allow or Deny.
Enable:
Check to enable rule.
Source IP Start:
Enter the starting IP address. Enter 0.0.0.0 if you
do not want to specify an IP range.
Source IP End:
Enter the ending IP address. Enter 255.255.255.255
if you do not want to specify and IP range.
Add: Click the Add button to add the rule. You must
click Save.Settings at the top to save the settings.
Inbound Filter This section will list any rules that are created. You
Rules List: may click the Edit icon to change the settings or
enable/disable the rule, or click the Delete icon
to remove the rule.
D-Link DIR-827 User Manual

Inbound Filters

65