Tools; Administrator Settings - D-Link DIR-655 User Manual

Section 3 - Configuration
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are two accounts that
can access the management interface through the web browser. The accounts are admin and user. Admin has read/write access while user has
read-only access. User can only view the settings but cannot make any changes. Only the admin account has the ability to change both admin and
user account passwords.
Admin Password: Enter a new password for the Administrator Login Name. The
administrator can make changes to the settings.
User Password: Enter the new password for the User login. If you login as the User, you
cannot change the settings (you can only view them).
Gateway Name: Enter a name for the DIR-655 router.
Enable Graphical Enables a challenge-response test to require users to type letters or
Authentication:
numbers from a distorted image displayed on the screen to prevent
online hackers and unauthorized users from gaining access to your
router's network settings.
Enable HTTPS
Check to enable HTTPS to connect to the router securely.
Server:
Enable Remote
Remote management allows the DIR-655 to be configured from the
Management:
Internet by a web browser. A username and password is still required
to access the Web-Management interface. In general, only a member
of your network can browse the built-in web pages to perform
Administrator tasks. This feature enables you to perform Administrator
tasks from the remote (Internet) host.
Remote Admin
The port number used to access the DIR-655.
Inbound Filter:
Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of
the DIR-655 and 8080 is the port used for the Web Management interface.
If you have enabled HTTPS Server and checked Use HTTPS, you must
enter https:// as part of the URL to access the router remotely.
Details: This section will list any rules that are created. You may click the Edit icon
to change the settings or enable/disable the rule, or click the Delete icon to remove the rule.
D-Link DIR-655 User Manual

Tools

Administrator Settings

76