Administrator Settings - D-Link Xtreme N L7-N-R2000 User Manual

Table of Contents

Section 3 - Configuration

This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are two accounts that

can access the management interface through the web browser. The accounts are admin and user. Admin has read/write access while user has

read-only access. User can only view the settings but cannot make any changes. Only the admin account has the ability to change both admin and

user account passwords.

Enter a new password for the Administrator Login Name. The administrator can make

Admin Password:

changes to the settings.

Enter the new password for the User login. If you login as the User, you cannot change

User Password:

the settings (you can only view them).

Gateway Name:

Enter a name for the L7-N-R2000 router.

Enables a challenge-response test to require users to type letters or numbers from a

Enable Graphical

distorted image displayed on the screen to prevent online hackers and unauthorized

Authentication:

users from gaining access to your router's network settings.

Enable HTTPS Server:

Check to enable HTTPS to connect to the router securely.

Enable Remote

Remote management allows the L7-N-R2000 to be configured from the Internet

Management:

by a web browser. A username and password is still required to access the Web-

Management interface. In general, only a member of your network can browse

the built-in web pages to perform Administrator tasks. This feature enables you to

perform Administrator tasks from the remote (Internet) host.

The port number used to access the L7-N-R2000.

Remote Admin Inbound

Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the L7-N-R2000

Filter:

and 8080 is the port used for the Web Management interface. If you have enabled

HTTPS Server and checked Use HTTPS, you must enter https:// as part of the URL

to access the router remotely.

Details:

This section will list any rules that are created. You may click the Edit icon to change

the settings or enable/disable the rule, or click the Delete icon to remove the rule.

L7-N-R2000 User Manual