Cisco CE-507 - Content Engine 507 User Manual page 3

Chapter 1 Introducing the Content Engine
Content Engine 560
78-11199-03
In addition, the CE-590 has two 10/100BASE-T Ethernet/Fast Ethernet ports with
RJ-45 receptacles. Port Ethernet 0 supports autodetect speed mode and
full-duplex operation. The second port (Ethernet 1) is supported in ACNS 4.0.3
software and later releases.
Table 1-1 lists the storage and memory specifications for the CE-590.
Table 1-1 CE-590 Storage and Memory Specifications
Specification
Internal hard disk storage 2 36-GB Ultra2 LVD SCSI
Expandable storage
Memory
The Content Engine 560 (CE-560) is a midrange Content Engine that services
medium-size enterprise networks. The CE-560 is configured for AC-input power.
The default factory configuration comes with one power supply installed.
The CE-560 has two internal 36-GB Ultra2 LVD SCSI hard drives and an external
SCSI port for attaching a six-drive Cisco Storage Array that increases CE-560
storage capacity by an additional 108 GB (6 x 18 GB).
In addition, the CE-560 has two 10/100BASE-T Ethernet/Fast Ethernet ports with
RJ-45 receptacles. Port Ethernet 0 supports autodetect speed mode and
full-duplex operation. The second port (Ethernet 1) is supported in ACNS 4.0.3
software and later releases.
Table 1-2 lists the storage and memory specifications for the CE-560.
Cisco Content Engine 500 Series Hardware Installation Guide
Description
hard drives
108 GB maximum
16-MB Flash memory
1-GB SDRAM
Introduction
1-3