Cisco CE-507 - Content Engine 507 User Manual page 12

System Hardware Features
Table 1-6
Item
Slot 0
Slot 1
Back Panel
Power receptacle
Power switch
Warning To avoid electric shock, do not connect safety extra-low voltage (SELV)
circuits to telephone-network voltage (TNV) circuits. LAN ports contain
SELV circuits, and WAN ports contain TNV circuits. Some LAN and WAN
ports both use RJ-45 connectors. Use caution when connecting cables.
Table 1-7
Table 1-7
Indicator
Power
System
LINK
100 Mbps
Slot 0
Cisco Content Engine 500 Series Hardware Installation Guide
1-12
Ports and Receptacles (continued)
Description
Bay for hard drive 0 or analog audio and video card
(CE-507AV or CE-560AV only).
Bay for hard drive 1.
AC or DC. The power cord connects to this plug.
This switch toggles between on and off.
A power light on the front panel, when lit, indicates
that the power is on.
describes the LEDs on the front panel.
LEDs
Color State
Green On
Green On
Green On
Green On
Green On
Off
Flashing
Chapter 1 Introducing the Content Engine
Description
Power is flowing to the Content Engine.
The network connection is active (packets
are being sent or received).
The Content Engine is connected to the
network.
The connection is a 100BASE-TX (Fast
Ethernet) connection.
There is no drive installed in Slot 0.
The drive in Slot 0 is not active.
The drive in Slot 0 is active.
78-11199-03