Cisco CE-507 - Content Engine 507 User Manual page 13

Chapter 1 Introducing the Content Engine
Cables and Connectors
Console Cable
78-11199-03
Table 1-7 LEDs (continued)
Indicator Color
Slot 1 Green
Status 0 1 2 3 Green
LEDs
This section describes the cables and connectors that connect your
Content Engine to a terminal and to the external network.
The Content Engine comes with a console cable kit that includes the following
cable and adapters:
One RJ-45 to RJ-45 rollover cable
•
Two RJ-45 to DB-9 adapters
•
Use the rollover cable to connect the Content Engine console port to the COM
port of an ASCII terminal or a PC running terminal emulation software. The
console port on the Content Engine is configured as data terminal equipment
(DTE) and uses an RJ-45 connector.
By attaching an RJ-45 to DB-9 adapter to the rollover cable, you create an RJ-45
to DB-9 null modem cable.
Cisco Content Engine 500 Series Hardware Installation Guide
State Description
On There is no drive installed in Slot 1.
Off The drive in Slot 1 is not active.
Flashing The drive in Slot 1 is active.
Steady In a steady display, the state of each LED is
constant. (See
steady-state LED variations.)
Rolling Reboot has begun.
In a rolling display, the four LEDs give the
appearance of a light that repeatedly moves
from left to right.
System Hardware Features
Table 3-1 for the meanings of
1-13