Cisco CE-507 - Content Engine 507 User Manual page 2

Introduction
Content Engine 590
Note
Cisco Content Engine 500 Series Hardware Installation Guide
1-2
The Content Engine 500 series offers the following Content Engine models for
high-, medium-, and low-end applications:
Model
Content Engine 590
Content Engine 560
Content Engine 507
Content Engine 560AV
Content Engine 507AV
The Content Engine 590 (CE-590) is a high-end Content Engine that services
Internet service providers and large enterprise networks. The Content Engine sits
on the WAN edge between your large enterprise or service provider network and
the Internet and is designed to handle DS-3 traffic at 45 Mbps speed.
The CE-590 is configured for AC-input power, whereas the CE-590-DC is
configured for DC-input power. The default factory configuration comes with one
power supply installed.
For purposes of simplicity, all models of the Content Engine 590 are hereafter
referred to jointly as the CE-590.
The CE-590 has two internal 36-gigabyte (GB) Ultra2 LVD SCSI hard drives and
an external SCSI port for attaching a six-drive Cisco Storage Array that increases
the Content Engine storage capacity by an additional 108 GB (6 x 18 GB).
Chapter 1
Application Product Number
High-end CE-590
CE-590-DC
CE-590-CDN
CE-590-DC-CDN
Medium-end CE-560
CE-560-CDN
Low-end CE-507
CE-507-CDN
Medium-end CE-560AV-CDN
Low-end CE-507AV-CDN
Introducing the Content Engine
78-11199-03