Cisco AS5200 - Universal Access Server Quick Start Manual page 15

3
Configure the Universal Access Server (continued)
Timesaver
Use Appendix
12
9 3
configure the access server using the setup script.
6
Install and Run Cisco Fast Step
1
Insert the Cisco Fast Step CD-ROM (attached to the inside back cover of this guide) into the CD-ROM drive
of the local PC you connected in Section
2
The Fast Step install program starts Setup.exe automatically. If it does not, use the following steps to start
the Fast Step program:
(a) Double-click the My Computer icon on your computer desktop.
(b) Double-click the CD icon.
(c) Double-click the Setup.exe icon.
The install program prompts you for the information it needs to install Cisco Fast Step, then copies the
software to your hard drive.
Configure the Universal Access Server
Once installed, the Cisco Fast Step setup program starts automatically. Follow the onscreen instructions to guide
you through configuring and testing the universal access server.
A to help you gather the appropriate information before you begin to
2 .
13