Cisco AS5200 - Universal Access Server Quick Start Manual page 16

A
Gather Configuration Information
Use this appendix to note the information you may need for configurating your universal access server. You can
get this information from your network administrator.
Item Ask Your Network Administrator
1 What do you want to name the access server (to
distinguish it from other Cisco devices on your network)?
2 What do you want the encrypted enable secret password
to be?
3 What do you want the nonencrypted enable password to
be?
4 What do you want the password for remote console
access to be? This is referred to as the virtual terminal
password.
5 Do you want to configure:
SNMP? If so,
— What is the public (read-only) community string?
— What is the private (read-write) community string?
14
LAT?
AppleTalk? If so,
— AppleTalk multizone networks?
— What are the AppleTalk zone names?
— What are the AppleTalk network numbers?
DECNet?
IP?
IGRP routing? If so,
— What is the IGRP autonomous system number?
CLNS?
IPX? If so,
— What are the IPX network numbers?
VINES?
XNS?
Apollo?
Bridging?
Enter the Information in This Column