Cisco AS5200 - Universal Access Server Quick Start Manual page 10

2
Install the Universal Access Server (continued)
8
Connect the Synchronous
Serial Port for WAN Access
You will need two CSU/DSUs or modems and two
serial transition cables to connect the synchronous
serial ports to a WAN.
Note: CSU/DSUs and serial transition cables are
not included.
Synchronous serial
port (DB-60)
Serial
transition
cable
Universal access server
EIA/TIA-232, EIA/TIA-449, V.35,
X.21, or EIA-530 connector
Step 1
Connect one end of a serial transition
cable to the port labeled Serial.
Step 2
Connect the other end of the cable to a
CSU/DSU or other DCE (such as a
modem).