Back Panel - NETGEAR GS724TPS - ProSafe - Gigabit Stackable PoE Smart Switch Hardware Installation Manual
Smart switch
Hide thumbs
Also See for GS724TPS - ProSafe - Gigabit Stackable PoE Smart Switch:
- Software administration manual (242 pages) ,
- Datasheet (4 pages) ,
- Function manual (10 pages)
Table of Contents
Advertisement
GS700TPS Smart Switch
•
Port LEDs.
•
System LEDs.
GS748TPS Front Panel
The GS748TPS is a 48-Ports 10/100/1000M + 4 SFP Combo ports Smart switch. Every RJ45 port
is capable of sensing the line speed and negotiating the operation duplex mode with the link
partner automatically.
Figure 3-2
illustrates the NETGEAR GS748TPS Smart Switch front panel.
Figure 3-2
The front panel contains the following:
•
48 RJ-45 connectors for 10/100/1000Mbps auto sensing Gigabit Ethernet switching ports.
•
Four SFP slots for SFP modules supporting 1000 (1000Base-SX/LX)/100M SFP.
•
Reset button to restart the device.
•
Recessed default reset button to restore the device back to the factory defaults. To restore the
device the button is depressed for more than 5 seconds.
•
One LED Mode Push Button to switch PoE enabled LEDs between Ethernet mode LED or
PoE mode LED.
•
Port LEDs.
•
System LEDs.
Back Panel
Figure 3-3
illustrates the NETGEAR GS700TPS Smart Switch back panel:
Figure 3-3
3-2
v1.0, April 2009
Physical Description
Advertisement
Table of Contents
Troubleshooting
