Port Leds; System Leds - NETGEAR GS724TPS - ProSafe - Gigabit Stackable PoE Smart Switch Hardware Installation Manual

GS700TPS Smart Switch

Port LEDs

The following table describes the port LED designations.
Table 3-1.
Port
24/48-10/100/1000 Ports
- One LED/Port
24/48-10/100/1000 Ports
- One LED/Port
4-SFP Ports - One LED/
Port

System LEDS

The following table describes the port LED designations.
3-4
LED
Link/ACT LED
PoE Mode
SFP Link/ACT LED
v1.0, April 2009
Port LEDs
Designation
• Off - No 10/100/1000Mbps link is established on
the port.
• Solid Green - A valid 1000Mbps link is established
on the port.
• Flashing Green - Packet transmission or reception
is occurring on the port at 1000Mbps.
• Solid Yellow - A valid 10/100Mbps link is
established on the port.
• Flashing Yellow - Packet transmission or
reception is occurring on the port at 10/100Mbps.
• Off - No PoE-powered device (PD) connected.
• Solid Green - The PoE powered device (PD) is
connected and the port is supplying power
successfully.
• Solid Yellow - Indicates one of the following
failures resulted in stopping power to that port:
• Short circuit on PoE power circuit.
• PoE power demand exceeds power
available.
• PoE current exceeds PD's
Classification.
• Out of proper voltage band (44-57
VDC).
• Off - No link is established on the port.
• Solid Green - A valid 100/1000Mbps SFP module
link is established on the port.
• Flashing Green - Packet transmission or reception
is occurring on the port at 100/1000Mbps.
Physical Description