(Optional) Running The Vpn Wizards To Configure Vpn Tunnels - Cisco 5510 - ASA SSL / IPsec VPN Edition Quick Start Manual

(Optional) Running the VPN Wizards to Configure VPN Tunnels

(Optional) Running the VPN Wizards to Configure
VPN Tunnels
Step 1
Cisco ASA 5580 Series Quick Start Guide
6-6
The VPN Wizards to configure VPN tunnels help you configure basic site-to-site
(LAN-to-LAN) and remote access VPN connections.
To run a VPN Wizard to configure a VPN tunnel, perform the following steps:
In the main ASDM window, choose Wizards > VPN Wizards > Site-to-Site
VPN Wizard or IPSec (IKEv1) Remote Access VPN Wizard.
(In ASDM 6.3 or earlier, choose Wizards > IPSec VPN Wizard > Tunnel
type—Site-to-Site or Remote Access.)
Chapter 6
Site-to-Site Remote Access
Remote Site Peer Remote Access Client
(Authentication,
Tunnel group)
VPN Client
(Authentication, Tunnel group)
IKE Policy
Client Authentication
IPSec Rule
User Accounts
Hosts and Networks
(for IPSec tunnel)
Address Pool
Attributes Pushed to VPN Client
IPSec Settings
(NAT exceptions)
Configuring the ASA
IKE Policy
78-19753-01