Connecting Interface Cables And Verifying Interface Connectivity - Cisco 5510 - ASA SSL / IPsec VPN Edition Quick Start Manual

Asa 5500 series adaptive security appliance
Hide thumbs Also See for 5510 - ASA SSL / IPsec VPN Edition:
Table of Contents

Advertisement

Connecting Interface Cables and Verifying Interface Connectivity

Step 5
Connecting Interface Cables and Verifying Interface
Connectivity
Step 1
Step 2
Cisco ASA 5580 Series Quick Start Guide
4-4
Check the System LED on the front of the ASA; once it is solid green, the system
has passed power-up diagnostics.
Connect to the Management 0/0 interface so that you can use ASDM to manage
the ASA.You can connect it directly with an Ethernet cable, or connect the PC and
the ASA to the same management network. Make sure the PC is configured to
obtain an IP address using DHCP.
The ASA 5580 has 2 management interfaces (Management 0/0 and
Note
Management 0/1); however, only Management 0/0 is configured for use.
If you want to use the CLI, connect your PC to the console port and see
Note
the CLI configuration guide for more information.
Connect your networks to the appropriate ports.
The ASA 5580 has nine expansion slots. Slots 3 through 8 support PCI
Note
Express network interface adapters. Slots 1, 2, and 9 are reserved. Your
exact configuration depends on the configuration you purchased.
Chapter 4
Installing the ASA 5580
78-19753-01

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Asa 5510Asa 5520Asa 5540Asa 5550Asa 5580Asa 5585-x

Table of Contents