Table of Contents
Advertisement
Supported Transceivers
S e n d d o c u m e n t c o m m e n t s t o u c s - d o c f e e d b a c k @ c i s c o . c o m
Table 1-4
LED
Power supply
Failure
Expansion
module
Port Level LEDs
There are port activity LEDs on the chassis and on the expansion modules.
behavior of the port LEDs.
Table 1-5
Color
Green (blinking)
Amber
Amber (blinking)
Off
Supported Transceivers
The fabric interconnect supports SFP+ Ethernet transceivers, SFP transcievers, and SFP Fibre Channel
transceivers. Specifications for these transcievers is at:
http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/installation/note/78_15160
.html
SFP+ Transceivers
The enhanced SFP+ 10-Gigabit Ethernet transceiver module is a bidirectional device with a transmitter
and receiver in the same physical package. It has a 20-pin connector on the electrical interface and
duplex LC connector on the optical interface.
Table 1-6
Model
SFP-10G-SR
SFP-10G-LR
Cisco UCS 6100 Series Fabric Interconnect Hardware Installation Guide
1-18
LEDs for the Cisco UCS 6120XP and Cisco UCS 6140XP (continued)
Location
Color
Power supply
Amber
(front of
Amber
chassis)
(blinking)
Off
Back of
Green
chassis
Amber
(blinking)
Off
Port LEDs
Supported SFP+ Optical Transceivers
Description
10-Gigabit Ethernet—short range SFP+ module
10-Gigabit Ethernet—long range SFP+ module
Description
Power supply failure such as over voltage, over current, fan
failure, or over temperature.
Power supply is working with a warning condition such as
high temperature, high power, or slow fan.
No warning or failure condition.
Expansion module is operating normally.
Booting, running diagnostics, or minor alert.
Module not detected.
Description
Link is up, enabled, and active.
Link is administratively disabled.
POST or operational error.
Link is down.
Table 1-6
lists the supported SFP+ optical transceivers.
Chapter 1
Product Overview
Table 1-5
summarizes the
OL-20036-02
Hide quick links:
Advertisement
Table of Contents
