Troubleshooting Tips; Technical Support - NETGEAR ProSafe FS752TP Installation Manual

FS752TP IG 30Mar11.fm Page 2 Thursday, March 31, 2011 12:17 PM
The Smart Control Center utility finds the switch and displays information such
as its MAC Address, IP Address, and model number.
Web Browser Access Button
Discover Button
If you cannot view your switch, verify that the cable connections are secure and
that the IP address configuration of the administrative computer is in the same
subnet as the switch. Then click the Discover button.
3. Click to select the line displaying the details of your switch. If there are multiple
Smart Switches in your network, be sure to select the one you want to
configure.
4. Click Web Browser Access to launch a Web browser on the administrative
computer and view the switch log in screen. The Login dialog appears.
5. Enter the default password of password in lowercase letters and click Login.
The System Information page appears.
6. Configure the switch for your network.
For information about switch features and for assistance with configuration
procedures, consult the online FS752TP Smart Switch Software Administration
Manual.
For information about each field to view or configure, click the help icon
available on each page of the switch user interface.
April 2011

Troubleshooting Tips

• Make sure the FS752TP Smart Switch is operational before you attempt to
discover it.
After you power up the FS752TP switch, wait at least two minutes before you
click the Discover button on the Smart Control Center utility.
• Make sure the Ethernet cables are securely plugged in.
For each powered-on device connected to the Smart Switch with a securely
plugged in Ethernet cable, the corresponding port status LED will light.
• Make sure the administrative computer's network settings are correct.
In most cases, computers are configured to obtain an IP address automatically
via DHCP. For help with this, refer to the FS752TP Smart Switch Software
Administration Manual; a link to the online manual is on the Resource CD.
If your network uses static IP addresses, be sure the switch and computer are
configured with valid IP addresses that are in the same subnet.

Technical Support

Thank you for selecting NETGEAR products.
After installing your device, locate the serial number on the label of your product and
use it to register your product at http://www.NETGEAR.com/register.
required before you can use the telephone support service. Registration via our
website is strongly recommended.
Go to http://support.netgear.com for product updates and Web support
For additional information about setting up, configuring, and using your switch, see
the FS752TP Smart Switch Software Administration Manual
For complete DoC please visit the NETGEAR EU Declarations of Conformity
website at: http://support.netgear.com/app/answers/detail/a_id/11621/
This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste
Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union,
this product should be treated and recycled in accordance with the laws of your jurisdiction
implementing the WEEE Directive.
©2011 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks of
NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or
registered trademarks of their respective holders. Information is subject to change without notice.
Registration is
.
.