Linksys SFE2000P - Managed Ethernet Switch Installation And Administration Manual page 7

The RPS1000 has these features:
• Six output channels to support multiple devices
• RPS1000 status information available through the network management application on the
device
• Front-panel LEDs to show status for each output channel, internal power supplies, fans, and
temperature
• Quick switch over capability to ensure that the switch does not reboot if the internal switch
power supply should fail
• Support for the SFE2000/2000P and SGE2000/2000P Ethernet switches
• Small form-factor suitable for rack-mounting to provide maximum wiring closet port density
• Two output levels:
– –48 VDC / 5.6A
– 12 VDC / 8.5A
The two output levels provide a maximum total output power of 380 W. The –48 VDC mode
powers telephone systems in Power over Ethernet (PoE) switches.
• A single 48-inch (1.2-meter) 16-pin-to-14-pin connector cable (part number: RPSCBL1) to
allow connection to an external device. Additional cables can be ordered separately.
Chapter 2: Product Overview
Features
RPS1000—Business Series 380W RPS Unit Installation & Administration
Chapter
2
4