Linksys SFE2000P - Managed Ethernet Switch Installation And Administration Manual page 15

Cisco rps1000 380w redundant power supply administration guide
Hide thumbs Also See for SFE2000P - Managed Ethernet Switch:
Table of Contents

Advertisement

WARNING: This unit is intended for installation in
restricted access areas. A restricted access area can be
accessed only through the use of a special tool, lock and
key, or other means of security.
WARNING: The plug-socket combination must be
accessible at all times, because it serves as the main
disconnecting device.
WARNING: This equipment must be grounded. Never
defeat the ground conductor or operate the equipment in
the absence of a suitably installed ground conductor.
Contact the appropriate electrical inspection authority or
an electrician if you are uncertain that suitable grounding
is available.
WARNING: Only trained and qualified personnel should
be allowed to install, replace, or service this equipment.
WARNING: Ultimate disposal of this product should be
handled according to all national laws and regulations.
WARNING: No user-serviceable parts inside. Do not
open.
WARNING: Installation of the equipment must comply
with local and national electrical codes.
In addition, you should always follow these guidelines:
Do not work alone if potentially hazardous conditions exist.
Never assume that power is disconnected from a circuit. Always check.
Chapter 3: Installation
Preparing for Installation
RPS1000—Business Series 380W RPS Unit Installation & Administration
Chapter
3
12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sge2000 - cisco - gigabit switchRps1000

Table of Contents