Configure Backup & Restore; Firmware Backup And Upload - D-Link DGS-1216T - Switch Product Manual

5 Configuration
Configure Backup & Restore
Allow the current configuration settings to be saved to a file (not including the password), and if necessary, to
be restored from a backup.
Click Backup to save the current settings to your disk.
Click Browse to browse your inventories for a saved backup settings file.
Click Restore after selecting the backup settings file you want to restore.

Firmware Backup and Upload

Allow for the firmware to be saved, or for an existing firmware file to be uploaded to the Switch.
Click Backup to save the firmware to your disk.
Click Browse to browse your inventories for a saved firmware file.
Click Restore after selecting the firmware file you want to restore.
Figure 36 – Tool Menu > Configure Backup and Restore
Note: To restore the configuration the
switch will restart
configurations will be lost
Figure 37 – Tool Menu > Firmware Backup and Upload
CAUTION: Do not disconnect the PC or remove
the power cord from device until upgrade
complete. Switch may crash if firmware upgrade
incompletely.
23
D-Link Web Smart Switch User Manual
and all current