Function Tree; Device Information - D-Link DGS-1210-16 Product Manual

5 Configuration
D-Link Web Smart Switch User Manual

Function Tree

All configuration options on the switch are accessed through the Setup menu on the left side of the screen.
Click on the setup item that you want to configure. The following sections provide more detailed description
of each feature and function.
Figure 43 –Function Tree

Device Information

The Device Information provides an overview of the switch, including essential information such as firmware
& hardware information, and IP address.
It also offers an overall status of common software features:
RSTP: Click Setting to link to Configuration > Spanning Tree > STP Global Settings. Default is disabled.
Port Mirroring: Click Setting to link to Configuration > Port Mirroring. Default is disabled.
Storm Control: Click Setting to link to Configuration > QoS > Storm Control. Default is disabled.
Safeguard Engine: Click Setting to link to Configuration > Security > Safeguard Engine. Default is enabled.
IGMP Snooping: Click Setting to link to Configuration > IGMP Snooping. Default is disabled.
SNMP: Click Setting to link to System > SNMP Setting. Default is disabled.
802.1X: Click Setting to link to Configuration > Security > 802.1X > 802.1X Settings. Default is disabled.
802.1Q Management VLAN: Click Setting to link to Configuration > 802.1Q Management VLAN. Default is
disabled.
DHCP Client: Click Setting to link to System > System Setting. Default is disabled.
2 2 7 7