Add(+), Delete(-) And Discover The Device; Device List - D-Link DGS-1210-16 Product Manual

4 SmartConsole Utility
Web Access
Select a switch from the Device List. Click this icon to launch your Internet browser (eg. The Internet
Explorer). Here you can configure the Switch through the Web-based Management utility. You may also get
into the Web-based Management by double-clicking the device in the device list.

Add(+), Delete(-) and Discover the device

Click the Discovery button to display all of the Web-Smart devices located in the same domain with the
management PC.
Click the + and insert a device IP address to add a device into the Discover List, or select a device and click
the – button to remove it.

Device List

This list displays all discovered Web-Smart devices on the network.
Definitions of the Device List features:
Monitor: Checking the Monitor box and the SmartConsole will collect the trap and log data from the device.
The in the monitor means the device was discovered by SmartConsole. Click the icon to have the device
to continue updating the information, such as system log or trap to the SmartConsole Utility. The icon will
appear . When the device was detected as not reachable, the icon will change to
power or the cable of this device is disconnected.
IP Address: Displays the current IP addresses of devices.
MAC Address: Displays the device MAC Addresses.
Figure 23 – DHCP Refresh
Figure 24 – SmartConsole Add device
Figure 25 – SmartConsole Delete device
Figure 26 – SmartConsole Device List
1 1 7 7
D-Link Web Smart Switch User Manual
. Please check if the