Dell PowerConnect 3248 Manual page 34

34 Addendum to the 32 48 and 5 224 User 's Guides
The following figure is representative of PowerConnect 3248 and 5224.
CLI Commands
The following table summarizes the equivalent CLI commands for items in
the Spanning Tree/Port Settings page.
Command
spanning-tree port-priority
priority
spanning-tree cost
cost
spanning-tree link-type
{auto | point-to-point |
shared}
spanning-tree edge-port
spanning-tree protocol-
migration interface
Usage
Configures the priority for the specified
interface.
The no form command restores the default.
Configures the Spanning Tree path cost for the
specified interface.
The no form command restores the default.
Configures the link type for the Rapid Spanning
Tree.
The no form command restores the default.
Specifies an interface as an edge port.
The no form command restores the default.
Re-checks the appropriate BPDU format to send
on the selected interface.