Dell PowerConnect 3248 Manual page 29

CLI Commands
The following table summarizes the equivalent CLI commands for items in
the Spanning Tree/Bridge Settings page.
Command
spanning-tree
spanning-tree mode {stp |
rstp}
spanning-tree forward-time
seconds
spanning-tree hello-time
time
spanning-tree max-age
seconds
spanning-tree priority
priority
show spanning-tree
[interface]
E x a m p l e
Console(config)#spanning-tree mode rstp
Console(config)#spanning-tree
Console(config)#spanning-tree forward-time 15
Console(config)#spanning-tree hello-time 2
Console(config)#spanning-tree max-age 20
Console(config)#spanning-tree priority 40000
Usage
Enables the Spanning Tree algorithm globally for
the switch.
The no form command disables STP .
Selects the Spanning Tree mode for the switch.
The no form command restores the default
(STP).
Configures the Spanning Tree bridge forward
time globally for the switch.
Configures the Spanning Tree bridge hello time
globally for the switch.
Configures the Spanning Tree bridge maximum
age globally for the switch.
Configures the Spanning Tree priority globally
for the switch.
Shows the Spanning Tree configuration.
Addendum to the 3 248 and 52 24 User 's Guides
29