Dell PowerConnect 3248 Manual page 21

E x a m p l e
Console(config)#interface ethernet 1/5
Console(config-if)#port security action shutdown
Console(config-if)#port security
Console(config-if)#
Switch 5224: Port Security
The Ports/Port Security page contains links to the following pages:
• Global Configuration
• Port Security Configuration
Switch 5224: Global Configuration
On the Ports/Port Security/Global Configuration page, you can set the
security action to be taken when a port intrusion is detected. This setting
applies to all ports on the switch.
The page provides one parameter to configure:
• Shutdown and Trap — Indicates the action to be taken when a port
security violation is detected:
– None: Indicates that no action should be taken. (This is the
default.)
– Trap and Shutdown: Indicates that the port should be disabled
and an SNMP trap message sent.
To save any changes you make in this page, click Apply Changes. If you do
not want to save the changes, click Refresh.
Addendum to the 3 248 and 52 24 User 's Guides
21