Dell PowerConnect 3248 Manual page 11

CLI Commands
The following table summarizes the equivalent CLI commands for items in
the Switch/Security/SSH page.
Command
ip ssh server
ip ssh {[timeout seconds]
| [authentication-retries
integer]}
disconnect ssh
connection_id
show ip ssh
show ssh
E x a m p l e
Console(config)#ip ssh server
Console(config)#ip ssh timeout 100
Console(config)#ip ssh authentication-retries 5
Console(config)#
Console#show ip ssh
Information of secure shell
SSH status: enable
SSH authentication timeout: 100
SSH authentication retries: 5
Console#show ssh
Information of secure shell
Session Username Version Encrypt method Negotiation
state
Usage
Enables the SSH server on the switch.
The no form command disables the SSH server.
Specifies the authentication timeout for the SSH
server and the number of retries allowed by a
client.
The no form command resets the values to the
default.
Terminates an SSH connection. The connection_id
is the session number displayed when using the
show ssh command.
Displays the status of the SSH server and the
configured values for authentication timeout and
retries.
Displays the status of current SSH sessions.
Addendum to the 3 248 and 52 24 User 's Guides
11