Setting The Clock - Memorex MVR-4040A Owner's Manual

SETTING THE CLOCK

EXAMPLE: Setting the clock to "8:30 AM" March, 23(TUE), 1999.
CHECK BEFORE YOU BEGIN
• Turn ON the TV and set to the
video channel 3 or 4.
• Turn ON the VCR POWER button.
• Press the TV/VCR selector button
to select the VCR mode.
When a TV is connected with an
audio/video cable, turn the TV and
this VCR on, and select the video
input mode on the TV.
3 + –
Press the SET or button to set the month,
then press the ENTER button.
– SET + ENTER
NOTE: • After a power failure or disconnection of the power, the timer settings will be lost. In this case, reset the
present time.
• Press the CH. SKIP/CANCEL button to move cursor backward for correction.
• If you want to corret time or date while the clock is functioning, press the MENU button, then press
SET + or – button to select the SYSTEM SET UP option, then press the ENTER button.
To make any adjustments perform steps 2 through 4.
4C90301A-E(P20-29)
1
Press the MENU button.
MENU
4
Set the day, year and time as in Step 3.
• The day of the week will automatically appear
when you set the year.
• Press and hold down the button to increase/
decrease the minute by 10.
• Auto date and time start functioning when
you finish setting.
– SET +
MONTH 3
DAY 1 (WED)
YEAR 2000
TIME 12 : 00 AM
+ / – /ENTER/CANCEL/MENU
25
2
Press the SET + or – button
to select the CLOCK SET
option, then press the ENTER
button.
– SET + ENTER
SYSTEM SET UP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
+ / – /ENTER/MENU
1
2 3 4
ENTER
MONTH 3
DAY 23 (TUE)
YEAR 1999
TIME 8 : 30 AM
+ / – /ENTER/CANCEL/MENU
25
26'04'1999, 10:52 AM