Novell ZENWORKS 7.2 LINUX MANAGEMENT - SCENARIOS 1 03-30-2007 Manual page 4

1 : I N S T A L L I N G T H E Z E N W O R K S A G E N T O N A D E L L
P O W E R E D G E S E R V E R
Objective:
Install the ZENworks Agent on a Dell* PowerEdge* server and obtain Dell Update
Packages (DUPs).
Steps:
1. Install the ZENworks 7.2 Linux Management server components. For detailed
information, see
Installation Guide.
2. Install the ZENworks Agent on a Dell PowerEdge server and register it in the
Management Zone. For detailed information, see
Devices in the
3. On the ZENworks server, download Dell Update packages by using the
ZENworks Linux Management Mirror utility. For detailed information, see
Mirroring Software
Guide. Ensure that you follow the instructions in the Enabling Dell PowerEdge
Support section.
4. In the ZENworks Control Center, perform the following steps:
a. Ensure that the Dell Update Package bundles are created. By default,
the bundles are created and updated in the zlmmirror folder.
b. Assign the bundle to the Dell PowerEdge server. For detailed
information, see
ZENworks 7.2 Linux Management Administration
c. Click the Devices tab, select the Dell PowerEdge server, click Actions,
then click Refresh.
The Dell PowerEdge server reboots, depending on the Dell Packages installed.
Expected Results:
On the Dell PowerEdge server, execute the rug bl command. This lists the DUP
bundles available on the server. Review the list.
Installation in the ZENworks 7.2 Linux Management
ZENworks 7.2 Linux Management Installation
in the ZENworks 7.2 Linux Management Administration
Assigning Dell Update Package Bundles
Setting Up Managed
Guide.
in the
Guide.
4
p.