Novell ZENWORKS 7.2 LINUX MANAGEMENT - SCENARIOS 1 03-30-2007 Manual page 18

1 1 : I N S T A L L I N G B U N D L E S U S I N G T H E Z E N W O R K S L I N U X
M A N A G E M E N T S O F T W A R E I N S T A L L E R
Objective:
Install a bundle on a managed device using the ZENworks Linux Management
Software Installer interface.
Steps:
1. Ensure that you have installed the ZENworks 7.2 Linux Management server
components and the ZENworks Agent. For detailed information, see
Installation in the
2. In the ZENworks Control Center, do the following:
a. Create a RPM bundle. For more information, see
Bundles
Guide.
b. Create a catalog. For more information, see
ZENworks 7.2 Linux Management Administration
Add the bundle to the catalog.
c.
to Catalogs
Guide
.
3. On the managed device, launch the ZENworks Linux Management Software
Installer by executing the zen-installer command.
4. Click Configure, then click Catalog.
5. Subscribe to the catalog created in Step 2b.
6. In the ZENworks Linux Management Software Installer window, select the
RPM bundle created in Step 2a.
7. Click Install.
Expected Results:
On the managed device, execute the rug bl command. The list includes the
bundled installed.
ZENworks 7.2 Linux Management Installation
in the ZENworks 7.2 Linux Management Administration
ZENworks 7.2 Linux Management Administration
in the
Creating RPM
Creating Catalogs
Guide.
For more information, see
Guide.
in the
Adding Bundles
18
p.