Only One Edirectory Instance Is Supported On Oes Servers; Oes 2 Sp2 Upgrade Paths; Netware 6.5 Sp8 Upgrade Paths - Novell OPEN ENTERPRISE SERVER 2 SP2 - PLANING AND IMPLEMENTATION GUIDE 11-10-2009 Implementation Manual

7.1.4 Only One eDirectory Instance Is Supported on OES
Servers
If your OES server has multiple instances of eDirectory
upgrade the server fails.
You must remove all instances, except the one that uses port 524, prior to an upgrade.
For more information, see

7.2 OES 2 SP2 Upgrade Paths

The following are supported upgrade paths for OES 2 SP2:
Supported OES 2 SP2 Upgrade Paths
Table 7-1
Source
OES 1 SP2 32-bit (Latest Patch Level) (Physical
only)
OES 2 32-bit (Physical or virtual)
OES 2 64-bit (Physical or virtual)
OES 2 SP1 32-bit (Physical or virtual)
OES 2 SP1 64-bit (Physical or virtual)
NOTE: Physical installations cannot be upgraded to virtual installations, and the reverse is also true.
Only physical to physical and virtual to virtual upgrades are supported.
For complete upgrade instructions, see
Guide.
In addition to upgrading the server itself, data and service migrations from OES 1 to OES 2 are also
supported. For more information, see the

7.3 NetWare 6.5 SP8 Upgrade Paths

For help upgrading from NetWare to OES 2, see the
Implementation
74 OES 2 SP2: Planning and Implementation Guide
Section 6.6.5, "One Instance Only," on page
"Upgrading to OES 2
Guide.
running (multiple trees), any attempt to
TM
Destination
OES 2 SP2 32-bit (Physical only)
OES 2 SP2 32-bit (Physical or virtual)
OES 2 SP2 64-bit (Physical or virtual)
OES 2 SP2 32-bit (Physical or virtual)
OES 2 SP2 64-bit (Physical or virtual)
SP2" in the
OES 2 SP2: Migration Tool Administration
OES 2 SP2: Upgrading to OES—Planning and
66.
OES 2 SP2: Installation
Guide.