Site Command; Ncp Implementation And Maintenance - Novell OPEN ENTERPRISE SERVER 2 SP2 - PLANING AND IMPLEMENTATION GUIDE 11-10-2009 Implementation Manual

Task
Switching to the root of the server
NOTE: The Linux FTP Server does not support wildcards at the root of the server.

17.5.3 SITE Command

The command enables FTP clients to access features specific to the Linux FTP Server.
SITE
NOTE: The
The command has the following syntax:
SITE
SITE [SLIST]
NOTE: The settings done through
This command is unique to the Linux FTP service and are not standard FTP commands.
Table 17-11
Table 17-11
Command
SLIST
NOTE: All the FTP users needs to be LUM-enabled on the FTP server.

17.6 NCP Implementation and Maintenance

If you have installed the NCP server for OES, eDirectory/Novell Client users can access files on the
OES 2 server with no additional configuration.
The implementation information in the following sections can help you get started with NCP on
OES 2 servers.
Section 17.6.1, "The Default NCP Volume," on page 201
Section 17.6.2, "Creating NCP Home and Data Volume Pointers," on page 201
Section 17.6.3, "Assigning File Trustee Rights," on page 201
Section 17.6.4, "NCP Caveats," on page 201
Section 17.6.5, "NCP Maintenance," on page 202
200 OES 2 SP2: Planning and Implementation Guide
command is not case sensitive if entered from an FTP client.
SITE
SITE
provides the command along with the description:
SITE
Linux FTP SITE command
Command Format
cd /
commands are valid only for the current session.
Description
Lists all the OES servers within the eDirectory tree.