Troubleshooting Cifs; Cifs Installation And Configuration Issues; Cifs Is Not Coming Up After Installation; Cifs Stops After Installation And Throws An Error 669, "Schema Not Extended - Novell OPEN ENTERPRISE SERVER 2 SP2 - ADMINISTRATION Manual

Troubleshooting CIFS

1 0
Section 10.1, "CIFS Installation and Configuration Issues," on page 67
Section 10.2, "CIFS Log In Issues," on page 68
Section 10.3, "CIFS Loading Issues," on page 68
Section 10.4, "CIFS Migration Issues," on page 69
Section 10.5, "Junction Target Changes Require DFSUTIL Command Execution to Clear the
Cache," on page 69

10.1 CIFS Installation and Configuration Issues

Section 10.1.1, "CIFS is not coming up after installation," on page 67
Section 10.1.2, "CIFS stops after installation and throws an error 669, "schema not extended","
on page 67
Section 10.1.3, "CIFS is not running with Samba," on page 67

10.1.1 CIFS is not coming up after installation

Description: CIFS status is listed as stopped after a successful installation.
Cause: You might have installed CIFS alone after installing Open Enterprise Server (OES) 2 SP2
Linux.
Action: Restart the OES 2 SP2 server for the installation and configuration settings to take effect.
10.1.2 CIFS stops after installation and throws an error 669,
"schema not extended"
Cause: A proxy user account is present.
Action: Delete the CIFS proxy user account and let the installer create the user.

10.1.3 CIFS is not running with Samba

Description: CIFS server does not come up if the Samba server is running.
Cause: CIFS cannot coexist with samba daemons.
Action: Login as root. Use the following commands to stop the Samba daemons and restart the
CIFS server.
/etc/init.d/smb stop
/etc/init.d/nmb stop
/etc/init.d/rcnovell-cifs start
10
Troubleshooting CIFS 67