What's Next - Novell OPEN ENTERPRISE SERVER 2 SP2 - ADMINISTRATION Manual

Item Novell CIFS
File system NSS is the only file
support system supported
for this release.
LUM and LUM and Samba
Samba enablement are not
enablement required.

3.4 What's Next

To proceed with CIFS installation on an OES 2 Linux server, continue with
and Setting Up CIFS," on page
Novell Samba
It is recommended (but not required) that you create Samba
shares on NSS data volumes. NSS is fully integrated with
eDirectory for easy management , and using an NSS volume
allows you to take advantage of the rich data security model in
NSS. You can use either iManager for the nssmu utility to create
an NSS volume on an OES2 Linux server. For instruction on how
to setup an NSS volume, see Managing NSS volumes in the
OES2 SP2:File Systems Management Guide.
Users must be enabled for LUM and Samba and assigned to a
Samba group.
21.
Chapter 4, "Installing
Planning and Implementing CIFS 19