WARNING: Handling Package Conflicts
Unless you are very experienced, follow the suggestions of YaST when handling
package conflicts, because otherwise the stability and functionality of your
system could be endangered by the existing conflict.
Figure 6.1 Conflict Management of the Package Manager
6.2.3 Packages and Software Repositories
If you want to search for packages originating from one particular software repository,
use the Repositories filter. In the default configuration, this filter shows a list of all
packages from the selected installation source. To restrict the list, use a secondary filter.
To view a list of the all installed packages from the selected repository, select the filter
Repositories then select Installation Summary from Secondary Filter list and deactivate
all check boxes except Keep.
If you are interested in the opposite and want to detect packages not belonging to any
repository, also use the Repositories filter and select Unmaintained Packages as the
Secondary Filter.
70
Deployment Guide