Novell LINUX ENTERPRISE DESKTOP 11 - DEPLOYMENT GUIDE 17-03-2009 Deployment Manual page 73

Once the scanner is successfully configured, choose Other > Scanning via Network in
the YaST scanner module. Enter the hostnames of the clients (separated by a comma)
that should be allowed to use the scanner under Server Settings > Permitted Clients for
saned and leave the configuration dialog with OK.
5.6.3 Scanning over the Network
To use a scanner that is shared over the network, run the YaST scanner module with
Hardware > Scanner. Open the network scanner configuration menu by Other >
Scanning via Network and enter the hostname of the machine the scanner is connected
to under Client Settings > Servers Used for the net Metadriver. Leave with OK. The
network scanner is now listed in the Scanner Configuration window and is ready to
use.
Setting Up Hardware Components with YaST 63