Novell LINUX ENTERPRISE DESKTOP 11 - DEPLOYMENT GUIDE 17-03-2009 Deployment Manual page 162

1 Launch your preferred Web browser.
2 Enter the following at the address prompt:
3 Enter your VNC password when prompted to do so. The browser window now
11.5.2 SSH Installation
Using SSH, you can remotely control the installation of your Linux machine using any
SSH client software.
Preparing for SSH Installation
Apart from installing the appropriate software package (OpenSSH for Linux and PuTTY
for Windows), you just need to pass the appropriate boot options to enable SSH for
installation. See
OpenSSH is installed by default on any SUSE Linux–based operating system.
Connecting to the Installation Program
1 Retrieve the installation target's IP address. If you have physical access to the
2 At a command line, enter the following command:
3 When prompted for a username, enter root.
152 Deployment Guide
http://ip_address_of_target:5801
displays the YaST screens as in a normal local installation.
Section 11.4.2, "Using Custom Boot Options"
target machine, just take the IP address the installation routine provides at the
console after the initial boot. Otherwise take the IP address that has been assigned
to this particular host in the DHCP server configuration.
ssh -X root@ip_address_of_target
Replace ip_address_of_target with the actual IP address of the installation
target.
(page 147) for details.