Wake On Lan - Novell LINUX ENTERPRISE DESKTOP 11 - DEPLOYMENT GUIDE 17-03-2009 Deployment Manual

keyboard, assuming the user will complete the command begun. A time-out of zero
disables the time-out completely (this is also the default). The maximum possible
time-out value is 35996 (just less than one hour).
PROMPT flag_val
If flag_val is 0, displays the boot prompt only if Shift or Alt is pressed or Caps
Lock or Scroll Lock is set (this is the default). If flag_val is 1, always displays
the boot prompt.
F2 filename
F1 filename
..etc...
F9 filename
F10 filename
Displays the indicated file on the screen when a function key is pressed at the boot
prompt. This can be used to implement preboot online help (presumably for the
kernel command line options). For backward compatibility with earlier releases,
F10 can be also entered as F0 . Note that there is currently no way to bind filenames
to F11 and F12 .
11.3.5 Preparing the Target System for PXE
Boot
Prepare the system's BIOS for PXE boot by including the PXE option in the BIOS boot
order.
WARNING: BIOS Boot Order
Do not place the PXE option ahead of the hard disk boot option in the BIOS.
Otherwise this system would try to reinstall itself every time you boot it.
11.3.6 Preparing the Target System for

Wake on LAN

Wake on LAN (WOL) requires the appropriate BIOS option to be enabled prior to the
installation. Also, note down the MAC address of the target system. This data is needed
to initiate Wake on LAN.
Remote Installation 145