Download Print this page
Master Forge GBC25047L Manual
Master Forge GBC25047L Manual

Master Forge GBC25047L Manual

4-burner liquid propane gas grill

Advertisement

Available languages

Available languages

Quick Links

MASTER FORGE and logo design are trademarks or
registered trademarks of LF, LLC. All rights reserved.
WARNING
FOR YOUR SAFETY:
DO NOT LEAVE THIS APPLIANCE UN-
ATTENDED WHILE IN USE, ESPECIALLY
COOKING THE FATTY MEAT AND CLOSE
THE LID TOO LONG TIME.
WARNING
FOR YOUR SAFETY:
For Outdoor Use Only!
(outside any enclosure)
WARNING
FOR YOUR SAFETY:
Improper installation, adjustment,
alteration, service or maintenance can
cause injury or property damage. Read
this instruction manual thoroughly before
installing or servicing this equipment.
WARNING:
expose you to chemicals including
carbon monoxide, soot, lead and lead
compounds, which are known to the
State of California to cause cancer
and birth defects or other reproductive
harm.For more information go to
www.P65Warnings.ca.gov.
DANGER
Never operate this appliance unattended.
Serial Number
Purchase Date
Thank you for purchasing this
Questions, problems or missing parts?
Before returning, contact us on:
800-963-0211, 8 a.m. - 8 p.m., EST, Monday - Sunday or ascs@lowes.com.
SG241139
This product can
If you smell gas:
• Shut off gas to appliance.
• Extinguish any open flame.
• Open lid.
• If odor continues, keep away from the
appliance and immediately call your gas
supplier or your fire department.
Do NOT store or use gasoline or other
flammable liquids or vapors in the vicinity
of this or any other appliance.
An LP cylinder not connected for use shall
NOT be stored in the vicinity of this or any
other appliance.
MASTER FORGE product.
1
MODEL #GBC25047L
4-BURNER LIQUID
PROPANE GAS GRILL
ATTACH YOUR RECEIPT HERE
DANGER
WARNING
GBC25047L-RA-ES-OM-F100
ITEM #6290981
Español p.23

Advertisement

loading
Need help?

Need help?

Do you have a question about the GBC25047L and is the answer not in the manual?

Questions and answers

Summary of Contents for Master Forge GBC25047L

  • Page 1 ITEM #6290981 MODEL #GBC25047L 4-BURNER LIQUID PROPANE GAS GRILL MASTER FORGE and logo design are trademarks or Español p.23 registered trademarks of LF, LLC. All rights reserved. ATTACH YOUR RECEIPT HERE WARNING FOR YOUR SAFETY: DO NOT LEAVE THIS APPLIANCE UN-...
  • Page 2 TABLE OF CONTENTS Safety Information ................2 Package Contents .
  • Page 3 SAFETY INFORMATION a. Constructed and marked in accordance with W Never use charcoal, lighter fluid, lava rocks, gasoline, the Specifications for LP gas Cylinders of the kerosene or alcohol with this product. U.S. Department of Transportation (D.O.T.) or W Your grill has been checked at all factory connections the Standard for Cylinders, Spheres and Tubes for leaks.
  • Page 4 SAFETY INFORMATION W Do NOT build this model of grill in any built-in or slide-in W Always place your grill on a hard, non-combustible, construction. Ignoring this warning could cause a fire level surface. An asphalt or blacktop surface may not or an explosion that can damage property and cause be acceptable for this purpose.
  • Page 5 PACKAGE CONTENTS...
  • Page 6 PACKAGE CONTENTS PART DESCRIPTION QUANTITY PART DESCRIPTION QUANTITY Lid Handle Left Front Leg Temperature Gauge Left Rear Leg Lid* Left Lower Cart Frame Warming Rack Foot Cooking Grid Right Cart Frame Lighting Hook* Heat Plate Rear Cart Frame Left Side Shelf LP Gas Tank Retainer Wire Burner* LP Gas Tank Block Wire...
  • Page 7 ASSEMBLY INSTRUCTIONS Step 1: Attach Bolts on Left Legs Insert four M6 x 16 bolts (CC) into holes on the left front leg (Q) and left rear leg (R) with leaving 5 mm threads exposed shown in Fig.1. Hardware Used M6 x 16 Bolt Step 2:...
  • Page 8 ASSEMBLY INSTRUCTIONS Step 3: Attach Upper Front Panel and Lower Front Panel Align the holes on the upper front panel (Z) and lower front panel (AA). Then attach them onto the left front leg (Q) and right cart frame (U) with eight M6 x 16 bolts (CC).
  • Page 9 ASSEMBLY INSTRUCTIONS Step 5: Attach Rear Cart Frame Align the holes on the rear cart frame (W) and attach it onto the left rear leg (R) and right cart frame (U) with two M6 x 16 bolts (CC). NOTE: Tighten all bolts completely. Hardware Used M6 x 16 Bolt...
  • Page 10 ASSEMBLY INSTRUCTIONS Step 7: Attach Axle and Wheel Insert the axle (AC) into right cart frame (U) and attach the two wheels (AB) onto the axle (AC) with two M10 nuts (DD) . Hardware Used M10-M6 Wrench Step 8: Attach LP Gas Tank Block Wire Attach the LP gas tank block wires (Y) onto the right cart frame (U) with four M6 x 16 bolts (CC).
  • Page 11 ASSEMBLY INSTRUCTIONS Step 9: Attach LP Gas Tank Retainer Wire Attach the LP gas tank retainer wire (X) onto the right cart frame (U). Step 10: Attach Temperature Gauge Attach the temperature gauge (B) onto the lid (C). NOTE: Remove the washer and wing nut pre- asembled on the temperature gauge (B) in first.
  • Page 12 ASSEMBLY INSTRUCTIONS Step 11: Attach Grill Body Assembly Attach the grill body assembly (I) with four M6 x 16 bolts (CC), four Ø6.4 washers (EE) and four Ø6.5 lock washers (FF). NOTE: Two people are needed to perform this step. Hardware Used M6 x 16 Bolt...
  • Page 13 ASSEMBLY INSTRUCTIONS Step 13: Fix Left Side Shelf Insert the three M6 x 16 bolts (CC) and one Ø6.4 washer (EE) into the lower holes shown in Fig.13. Tighten all bolts completely. Hardware Used M6 x 16 Bolt Ø6.4 Washer Step 14: Attach Right Side Shelf Attach the right side shelf (J) with two M6 x 16...
  • Page 14 ASSEMBLY INSTRUCTIONS Step 15: Fix Right Side Shelf Insert the three M6 x 16 bolts (CC) and one Ø6.4 washer (EE) into the lower holes shown in Fig.15. Tighten all bolts completely. Hardware Used M6 x 16 Bolt Ø6.4 Washer Step 16: Attach Control Knobs Push four control knobs (L) onto the stem of the...
  • Page 15 ASSEMBLY INSTRUCTIONS Step 18: Attach Heat Plates and Cooking Grids Put the four heat plates (F) and three cooking grids (E) into place. Step 19: Attach Warming Rack Put the warming rack (D) into place. Step 20: Insert Grease Cup and place Grease Tray Insert the grease tray (N) under the grill body assembly (I) and then place the grease cup (O).
  • Page 16 INSTALLATION INSTRUCTIONS To operate, you will need one precision-filled standard grill LP gas tank with external valve threads. CAUTION 20 Lbs W LP gas tank must be properly disconnected 9 Kg and removed prior to moving this grill. 12.2 in. / 31 cm Inserting LP Gas Tank Place precision-filled LP gas tank upright into the notches in the right cart frame so the tank valve is facing the gas line connection.
  • Page 17 OPERATING INSTRUCTIONS Checking for Leaks Figure 2 WARNING: The cylinder face elastomeric face seal element on these Burner/ devices could, over time, show marked and visible damage or deterioration Venturi that might cause a leak even with the connection tightened; a statement Tube that a visual inspection for the seal must be carried out every time a LP gas cylinder is replace or refilled, and a statement that any LP-gas cylinder...
  • Page 18 OPERATING INSTRUCTIONS(CONTINUED) 4. Connect LP gas tank per “Installing LP Gas Tank” section. 5. Turn LP gas tank valve to “OPEN”. 6. Push and turn control knob to (HIGH). the burner should light. 7. If ignition does not occur in 5 seconds, turn burner control knob “ OFF”, wait 5 minutes, and repeat lighting procedure.
  • Page 19 CARE AND MAINTENANCE(CONTINUED) 6. Check for obstructions of airflow to the burners. Spiders, insects and webs can clog the burner/venturi tube. A clogged burner tube can lead to a fire. Cleaning Surfaces Figure 7 1. Wipe surfaces clean with mild dishwashing detergent or baking soda mixed Burner Flame Conditions with water.
  • Page 20 LIMITED WARRANTY Proof of purchase is required to access this warranty program, which is in effect from the date of purchase. Customers will be subject to parts, shipping, and handling fees if unable to provide proof of the purchase or after the warranty has expired.
  • Page 21 TROUBLESHOOTING Check if LP gas tank is empty A. If empty, exchange, refill or replace LP gas tank No gas flow B. If LP gas tank is not empty, refer to “Sudden drop in gas flow or reduced flame height” (see below) LP gas tank is low or empty Exchange, refill or replace LP gas tank Turn LP gas tank valve to “CLOSED”...
  • Page 22 REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 800-963-0211, 8 a.m. - 8 p.m., EST, Monday - Sunday. You may also contact us at ascs@lowes.com. PART DESCRIPTION PART# COVERED UNDER WARRANTY Lid Handle G25047-010 Temperature Gauge B0104-M13 Lid* G25047-020...
  • Page 23 ARTÍCULO #6290981 MODELO #GBC25047L PARRILLA A GAS PROPANO LÍQUIDO DE 4 QUEMADORES MASTER FORGE y el diseño del logotipo son Español pág. 23 marcas comerciales o marcas registradas de LF, LLC. Todos los derechos reservados. ADJUNTE SU RECIBO AQUÍ ADVERTENCIA PARA SU SEGURIDAD: NO DEJE ESTE ELECTRODOMÉSTICO SIN...
  • Page 24 ÍNDICE Información de seguridad................24 Contenido del paquete .
  • Page 25 INFORMACIÓN DE SEGURIDAD W Necesita un cilindro de gas PL para usarse. Solo se pueden o cerca de este aparato. utilizar cilindros marcados como "propano". W Nunca llene el cilindro más allá del 80% de su capacidad. Si W El cilindro de gas licuado del petróleo debe estar: no sigue las instrucciones anteriores al pie de la letra, podría producirse un incendio y ocasionar lesiones graves o daños Fabricado y marcado según las Especificaciones para...
  • Page 26 INFORMACIÓN DE SEGURIDAD y la parte posterior de la unidad. NO utilice este aparato bajo W NO intente mover la parrilla mientras la está usando. Deje ningún tipo de construcción combustible en la parte superior. que la parrilla se enfríe antes de moverla o guardarla. W Es esencial que mantenga limpios el compartimiento de la W El cilindro de gas PL se debe desconectar y retirar de manera válvula, los quemadores y los pasajes de circulación de aire...
  • Page 27 CONTENIDO DEL PAQUETE...
  • Page 28 CONTENIDO DEL PAQUETE PIEZA DESCRIPCIÓN CANTIDAD PIEZA DESCRIPCIÓN CANTIDAD Manija de la tapa Pata frontal izquierda Medidor de temperatura Pata posterior izquierda Marco del carrito inferior Tapa* izquierdo Rejilla para calentar Base Rejilla de cocción Marco del carro derecho Gancho de encendido* Plato calentador Marco posterior del carrito Repisa lateral izquierda...
  • Page 29 INSTRUCCIONES DE ENSAMBLAJE Paso 1: ajuste los pernos en las patas izquierdas Inserte cuatro pernos M6 x 16 (CC) en los orificios de la pata delantera izquierda (Q) y la pata posterior izquierda (R). Deje 5 mm de rosca expuesta como se muestra en la Fig. 1. Aditamentos utilizados Perno M6 x 16...
  • Page 30 INSTRUCCIONES DE ENSAMBLAJE Paso 3: una el panel frontal superior y el panel frontal inferior Alinee los orificios del panel frontal superior (Z) y del panel frontal inferior (AA). Luego, una los paneles a la pata delantera izquierda (Q) y a la pata posterior derecha (U) con ocho pernos M6 x 16 (CC).
  • Page 31 INSTRUCCIONES DE ENSAMBLAJE Paso 5: una el marco posterior del carrito. Alinee los orificios en el marco posterior del carrito (W) y fíjelo a la pata posterior izquierda (R) y al marco derecho del carrito (U) con dos pernos M6 x 16 (CC). NOTA: ajuste todos los pernos por completo.
  • Page 32 INSTRUCCIONES DE ENSAMBLAJE Paso 7: coloque el eje y la rueda Inserte el eje (AC) en el marco del carrito derecho (U) y fije las dos ruedas (AB) al eje (AC) con dos tuercas M10 (DD). Aditamentos utilizados Tuerca Llave inglesa M10-M6 Paso 8: fije el alambre de retención del...
  • Page 33 INSTRUCCIONES DE ENSAMBLAJE Paso 9: coloque el alambre de retención del tanque de gas licuado de petróleo Coloque el alambre de retención del tanque de gas licuado de petróleo (X) en el marco del carrito derecho (U). Paso 10: coloque el medidor de temperatura Coloque el medidor de temperatura (B) en la tapa (C).
  • Page 34 INSTRUCCIONES DE ENSAMBLAJE Paso 11: una el ensamble del cuerpo de la parrilla Una el ensamble del cuerpo de la parrilla (I) con cuatro pernos M6 x 16 (CC), cuatro arandelas Ø6.4 (EE) y cuatro arandelas de presión Ø6.5 (FF). NOTA: se necesitan dos personas para realizar este paso.
  • Page 35 INSTRUCCIONES DE ENSAMBLAJE Paso 13: una la repisa lateral izquierda Inserte los tres pernos M6 x 16 (CC) y una arandela Ø6.4 (EE) en los orificios inferiores, como se muestra en la Fig. 13. Ajuste todos los pernos por completo. Aditamentos utilizados Perno M6 x 16...
  • Page 36 INSTRUCCIONES DE ENSAMBLAJE Paso 15: fije la rejilla lateral derecha Inserte los tres pernos M6 x 16 (CC) y una arandela Ø6.4 (EE) en los orificios inferiores como se muestra en la Fig.15. Ajuste todos los pernos por completo. Aditamentos utilizados Perno M6 x 16 Arandela...
  • Page 37 INSTRUCCIONES DE ENSAMBLAJE Paso 18: coloque los platos calentadores y las rejillas de cocción Coloque los cuatro platos calentadores (F) y las tres rejillas de cocción (E) en su lugar. Paso 19: coloque la rejilla para calentar Coloque la rejilla para calentar (D) en su lugar. Paso 20: inserte el colector de goteo de grasa y coloque la bandeja de recolección de grasa.
  • Page 38 INSTRUCCIONES DE INSTALACIÓN Para hacer funcionar el producto, necesitará un tanque de gas licuado de petróleo estándar, lleno con precisión, que tenga roscas externas en la válvula. PRECAUCIÓN 20 Lbs W El tanque de gas PL se debe desconectar y retirar 9.07 kg de manera adecuada antes de mover esta rejilla.
  • Page 39 INSTRUCCIONES DE FUNCIONAMIENTO Búsqueda de fugas Figura 2 ADVERTENCIA: el elemento de sellado elástico en la cara del cilindro de estos Quemador/ dispositivos podría, con el tiempo, mostrar daños o deterioro marcados y visibles tubo de que podrían causar una fuga incluso con la conexión ajustada. Se debe realizar Venturi una inspección visual del sello cada vez que se reemplace o se llene un cilindro de gas licuado de petróleo, y cualquier cilindro de gas licuado de petróleo que muestre...
  • Page 40 INSTRUCCIONES DE FUNCIONAMIENTO (CONTINUACIÓN) Conecte el tanque de gas licuado de petróleo según se indica en la sección “Instalación del tanque de gas licuado de petróleo”. Coloque la válvula del tanque de gas licuado de petróleo en la posición “OPEN” (Abierto). Presione y gire la perilla de control a la posición (ALTA).
  • Page 41 CUIDADO Y MANTENIMIENTO (CONTINUACIÓN) Revise si hay obstrucciones en el flujo de aire que va hacia los quemadores. Las arañas, los insectos y las telarañas pueden obstruir el quemador o el tubo de Venturi. Si el tubo del quemador está obstruido puede producir un incendio. Limpieza de las superficies Figura 7 Limpie las superficies con detergente para platos suave o bicarbonato de sodio...
  • Page 42 GARANTÍA LIMITADA Se requiere un comprobante de compra para acceder a este programa de garantía, que entra en vigencia a partir de la fecha de compra. Si no se conserva el comprobante de compra o si se venció la garantía, el costo de las piezas, el envío y la manipulación quedará...
  • Page 43 SOLUCIÓN DE PROBLEMAS Revise si el tanque de gas PL está vacío. A. Si está vacío, cambie, rellene o reemplace el tanque de gas PL. No hay flujo de gas B. Si el tanque de gas PL no está vacío, consulte la Sección "Disminución repentina del flujo de gas o de la altura de la llama"...
  • Page 44 LISTA DE PIEZAS DE REPUESTO Para obtener piezas de repuesto, llame a nuestro Departamento de Servicio al Cliente al 800‑963‑0211, 8 a.m. a 8 p.m., hora estándar del Este, de lunes a domingos. También puede ponerse en contacto con nosotros a través de ascs@lowes.com.

This manual is also suitable for:

6290981