Assigning A Default Webaccess Agent To A Post Office - Novell GROUPWISE 8 - ADMINISTRATION Administration Manual

<UL>
<LI><A HREF="http://172.16.5.18/gw/
webacc?GWAP.ip=172.16.6.10&GWAP.port=7204>San Francisco
</A></LI>
<LI><A HREF="http://172.16.5.18/gw/webacc?GWAP.ip=172.16.6.12>New York
</A></LI>
<LI><A HREF="http://172.16.5.18/gw/
webacc?GWAP.ip=172.16.6.33&GWAP.port=7203>London
</A></LI>
</UL>
The displayed HTML page would contain the following list of locations:
San Francisco
New York
London
When a user selects a location, the WebAccess Application routes all requests to the WebAccess
Agent at the selected location.

53.3.4 Assigning a Default WebAccess Agent to a Post Office

The WebAccess Application uses the post office's default WebAccess Agent if no WebAccess
Agent has been specified in the WebAccess URL (see
Agent in the WebAccess URL," on page
applies only if you have multiple WebAccess Agents installed in your GroupWise system. If you
have only one WebAccess Agent, it services all post offices.
To assign a default WebAccess Agent to a post office:
1 In ConsoleOne, right-click the Post Office object, then click Properties.
2 Click GroupWise > Default WebAccess to display the Default WebAccess page.
Section 53.3.3, "Specifying a WebAccess
886) or if that WebAccess Agent is unavailable. This
Scaling Your WebAccess Installation 887