Netware And Windows: Setting Up A Basic Groupwise System - Novell GROUPWISE 7 Installation Manual

3.3.1 NetWare and Windows: Setting Up a Basic GroupWise
System
You should have already reviewed
page 26 and filled out the worksheet.
The following sections step you through the GroupWise Installation program, Installation Advisor
and, Setup Advisor. The Installation Advisor installs the GroupWise software. It then launches the
Setup Advisor to create your domain and post office, set up the GroupWise agents, and set up the
GroupWise Windows client (if desired) on your local machine.
"Starting the GroupWise Installation Program on Windows" on page 46
"Installing the GroupWise Software" on page 48
"Providing System Information" on page 49
"Creating Your Basic GroupWise System" on page 52
"Installing and Starting the GroupWise Agents" on page 53
"Setting Up and Running the GroupWise Windows Client on Your Local Machine" on page 58
"Installing the GroupWise Administrator Snap-Ins to Additional Windows Machines" on
page 60
IMPORTANT: If you plan to install GroupWise in a clustered server environment, see the
GroupWise 7 Interoperability Guide (http://www.novell.com/documentation/gw7)
set up your GroupWise system.
Starting the GroupWise Installation Program on Windows
To start the GroupWise Installation program:
1 At a Windows machine that meets the administrator machine requirements listed in
Section 2.1, "GroupWise Administration Requirements," on page
equivalent to the eDirectory tree in which you are installing GroupWise.
2 Insert the GroupWise 7 Administrator for NetWare/Windows CD into the CD drive to start the
GroupWise Installation program.
46 GroupWise 7 Installation Guide
Section 3.2, "Planning Your Basic GroupWise System," on
before starting to
21, log in as an Admin