Setting Up Your Data Synchronizer System; Planning The Data Synchronizer Database; Establishing Data Synchronizer System Security - Novell DATA SYNCHRONIZER MOBILITY PACK - INSTALLATION GUIDE 07-2010 Installation Manual

2.1.6 Planning the Data Synchronizer Database

When you run the Mobility Pack Installation program, it creates a PostgreSQL database used to
store Synchronizer system configuration information and pending events when synchronization
between the Sync Engine and connectors is interrupted. The Synchronizer database is named
, and the user that has access is named
datasync
for the Synchronizer database user.
IMPORTANT: Use only alphanumeric characters in the password. Do not include special
characters.
DATA SYNCHRONIZER MOBILITY PACK INSTALLATION SUMMARY SHEET
Under Synchronizer Database, specify the password that you want to use for the Synchronizer database.
The Mobility Connector uses a secondary database named
synchronization between the Mobility Connector and mobile devices is interrupted. The
database uses the same username and password as the

2.1.7 Establishing Data Synchronizer System Security

Configuration and administration of your Synchronizer system is performed through Synchronizer
Web Admin. From Synchronizer Web Admin, you can:
Add connectors to your Synchronizer system
Add users to connectors
Start, stop, and configure connectors
Reconfigure the connection to your LDAP server
Reconfigure the Sync Engine
To protect your Synchronizer system operation and configuration, you must choose one LDAP
administrator user to access Synchronizer Web Admin. This LDAP user becomes the initial
Synchronizer administrator. Make sure that you know this administrator user's password.
SINGLE-SERVER DATA SYNCHRONIZER INSTALLATION SUMMARY SHEET
Under Synchronizer Web Admin, specify the LDAP administrator username and password that you want
to grant access to Synchronizer Web Admin.
You can add more users as Synchronizer administrators after installation, as described in
Up Multiple Synchronizer Administrator
Novell Data Synchronizer Administration

2.2 Setting Up Your Data Synchronizer System

You should already have reviewed
and filled out the Mobility Pack Installation Summary
datasync_user
mobility
datasync
Users" in "Managing Your Synchronizer
Guide.
Chapter 2.1, "Planning a Data Synchronizer System," on page 15
Sheet.
. You must supply the password
to store events when
mobility
database.
"Setting
System" in the
Mobility Pack Installation 23