Installing And Configuring Business Continuity Clustering On Each Cluster Node; Removing The Nfs Share From Your Server; Cleaning Up The Business Continuity Clustering Installation Source - Novell BUSINESS CONTINUITY CLUSTERING 1.2 - ADMINISTRATION Administration Manual

4.5.3 Installing and Configuring Business Continuity
Clustering on Each Cluster Node
You must install BCC 1.2 software on each cluster node in every cluster that you want to be in the
business continuity cluster.
1 Create a new YaST software installation source by opening a shell and running
.
inst_source
2 Add NFS as the source type.
3 Specify the server and directory you entered in
4 Install Business Continuity Clustering software by opening a shell and running the following
commands in the order indicated:
yast2 sw_single -i \
novell-business-continuity-cluster \
novell-cluster-services-cli \
yast2-bcc
5 Autoconfigure the Business Continuity Clustering software by running the following command
from a shell:
yast2 bcc_autoconfig path_to_XML_profile
Replace path_to_XML_profile with the path to the file you created in
6 Remove the installation source you created in
6a Open a shell and run
6b Select the Business Continuity Clustering installation source, click Delete, then click
Finish.

4.5.4 Removing the NFS Share from Your Server

You can optionally remove the Business Continuity Clustering installation directory as an NFS
share. After a successful install, it is needed only if you re-install or uninstall BCC.
1 Open a shell and run
2 Select Start Server, then click Next.
3 Select the Business Continuity Clustering installation directory, click Delete, then click Finish.
4.5.5 Cleaning Up the Business Continuity Clustering
Installation Source
Clean up the Business Continuity Clustering installation source by opening a terminal console and
running one of the commands below, depending on which method you chose in
rm -rf /tmp/bcc_install
or
umount /mnt/iso
yast2 inst_source
yast2 nfs_server
Step 4 on page 54, click OK, then Finish.
Step 1 on page
Step 1 above by completing the following steps:
.
Installing Business Continuity Clustering
yast2
53.
Step 1 on page 54.
55